Equipped with the advanced MAZATROL MATRIX 2 CNC.
Designed for higher productivity thanks to completing all machining processes for chucking workpieces in a single setup
The MULTIPLEX 6200-II and 6200-II Y are equipped with the advanced MAZATROL MATRIX 2 CNC to deliver higher accuracy and higher productivity. The MULTIPLEX series combines two NC turning centers with milling capacity and performs a variety of machining such as continuous/simultaneous machining by both spindles thanks to automatic workpiece transfer from one spindle to the other. Additionally, setups can be performed as well as workpiece loading/unloading on one spindle while machining is being performed on the other.
2-Spindle, 2-/3-Turret CNC Turning Centers
The MULTIPLEX series, designed for mid-size lot production, has been well accepted by the world-wide metalworking industry. Including the MULTIPLEX 6300-II Y with a lower turret that realizes 4-axis simultaneous machining, the MULTIPLEX series meets a wide variety of production requirements.
|CAPACITY||Chuck size||8 "|
|Maximum swing||320 mm|
|Maximum machining length chuck work||180 mm|
|Maximum machining length shaft work||530 mm|
|Maximum bar size diameter||51 mm|
|SPINDLE (HD1 & HD2)||Rotating speed maximum||5,000 min-¹|
|TURRET (LEFT & RIGHT)||Number of tools on turret||12|
|Maximum milling spindle speed||4,500 min-¹|
|FEED AXES||Rapid traverse X1/X2||30,500 mm/min|
|Rapid traverse Z1/Z2||33,000 mm/min|
|Movement stroke X1/X2||230 mm|
|Movement stroke Z1/Z2||440 mm|
|Movement stroke Z-axis (HD2)||495 mm|
|MACHINE DIMENSIONS||Length||3,570 mm|