| Machine Specifications |
Axis processing movement |
Stationary table with X-Y-Z movement (flying optics) |
| Maximum work piece size X-Y |
2000 mm x 4000 mm |
| Work table height |
900 mm |
| Axis travel X-Y |
2060 mm x 4075 mm |
| Z axis travel |
110 mm |
| Axis acceleration X-Y-Z |
X-Y 1.2 g, Z 1.2 g |
| Rapid traverse rate X-Y |
120 m/min |
| Rapid traverse rate Z |
60 m/min |
| Design |
Bridge gantry style |
| Axis drive system X1/X2 - Y |
Helical rack & pinion |
| Axis drive system Z |
Digital servo drive, ball screw |
| Positional accuracy X-Y |
± 0.05 / 500 mm |
| Positional accuracy Z |
± 0.01 / 100 mm |
| Repeatability X-Y-Z |
± 0.03 mm |
| Cutting head |
Mazak multi-function torch |
| Z axis profiler |
Non-contact type/capacitance |
| Lighting system |
Fluorescent lamp |
| Operation status indicator lights |
Yellow/laser source on, red/laser beam on |
| Programmable assist gas ports |
Shop air for system operation (not for cutting) |
| Programmable gas range |
0.020 MPa to 2.5 MPa |
| Noise level laser |
Maximum 80 dBA |
| Safety interlock system |
Door, shuttle door, hood |
| Machine base |
Precision machined single cast iron base |
| System weight |
21,300 kg |
| Laser Generator Specifications |
Generator style |
LD excited Yb fiber |
| Cabinet enclosure |
Nema 12 air conditioned sealed cabinet |
| CW output power |
6 kW |
| Power stability |
± 2% |
| Laser wave length |
1.07 µm |
| Laser power mode selection |
CW, pulsed |
| Chiller System |
Reservoir |
178 L |
| Circuit cooled |
Torch, laser |
| Material Processing Range |
Mild steel O₂ |
25 mm |
| Mild steel N₂ |
15 mm |
| Stainless steel N₂ |
25 mm |
| Aluminium N₂ |
25 mm |
| Galvanized N₂ |
6 mm |
| Brass N₂ |
12 mm |
| Copper N₂ |
12 mm |
| Control Specifications |
Name |
Mazak Preview 3 |
| CPU |
64 bit |
| Data input |
Touch screen |
| Monitor |
15" XGA Colour TFT |
| Graphic preview display |
2D & 3D tool path |
| Memory storage |
16 GB |
| Program storage |
1 GB |
| Input ports |
USB 2.0 x 3 ports |
| Network connection |
LAN 1 port (100/1000 BASE) |
| Controlled axis function |
Simultaneous 3 axis control (X1&2-Y-Z-W) W axis focal point adjustment/SFT |
| Minimum input command |
0.001 mm |
| Data input |
MDI input/program editing |
| Servo system |
Digital |
| Position system |
Encoder |
| Control method |
Semi-closed loop |
| Pallet Specifications |
Maximum work piece weight per pallet |
1,600 kg |
| Maximum loading height of work piece |
30 mm |
| Maximum work piece size X-Y |
2000 mm x 4000 mm |
| Work piece reference |
2 reference stops or laser edge find |
| Clamps |
2 manual clamps standard |
| Number pallets |
2 |
| Shuttle time to swap pallets |
25 s |
| Work table support |
Knife edge slats - 100 mm |
| Light curtain safety barrier |
Fixed outside the pallet zone |
| Material Specifications |
Camber |
3 mm |
| Angle |
6 mm |
| Flatness |
2 mm |
