SPACE GEAR-U44

Product: Laser
zoom

Setup time is considerably reduced by the ability to cut multiple workpieces from a single long pipe.

  • Only 3m x 3m footprint
  • The cutting head has been designed to achieve the highest performance in the most difficult conditions, processing multiple faces of a workpiece at any angle and processing a workpiece with simultaneously controlling five axes. 
  • 6-axis with integrated chuck
  • The machine is rationally designed to have high rigidity, high cutting performance,  accuracy and thus very high reliability. 
  • 2D flat worksheets, pipe and cubic workpieces all cut by one machine 
  • In the event of a profiling alarm, cutting will be stopped due to a feed hold. When the retrial profiling function is activated, the Z-axis will automatically rise, profiling will be performed again and the program will restart. 

Machine Specifications

zoom
2.5 kW Laser Values
Model characteristics Type Flying optics type
Axis drive system AC servomotor Digital servo drives and ball screws
Z axis profiling Non-contact type
Worksheet clamp and locator Two manual Worksheet clamps Locator: 1
Worksheet support method Knife edge; 100-mm pitch
Lighting unit A 68-W beam lamp integrated in the machine lights up the machining position
Oscillation Indicator Yellow signal lamp (laser high voltage ON) Red signal lamp (shutter open)
Assist gas changer Number of gas types: 3 Supply pressure: Oxygen, air 0.8 MPa Assist gas Max. 3.0 MPa
Noise Level Laser Maximum 80 dBA
Safety Interlock System Protects the operator from spatters and reflected laser beams – Class 1
Machine Base Precision machined single cast iron base
Maximum machining size Flat plate 1250 mm x 1250 mm
Plate thickness 19 mm
Solid 900 x 900 x 340 mm
Work table height 900 mm
Maximum loading mass 275 kg
Axis Travel X-axis 1,270 mm
Y-axis 1,270 mm
Z-axis 340 mm
A-axis +/- 99999.999 deg
B-axis +/- 135 deg
C-axis +/- 360 deg
Rapid traverse rate X-, Y- and Z- axis 24 m/min (945 IPM)
A- and B- axis 9,600 °/min
C-axis 12,000 °/min
Maximum machining feedrate X-, Y- and Z- axis 15 m/min (591 IPM)
Positioning accuracy X- and Y- axis +/-0.01/500 mm
Repeatability X-, Y- and Z- axis +/-0.005 mm
A-, B- and C-axis +/-0.01°
Laser machining torch With a lens of focal distance: 7.5‘ (Ф2 in, withstand pressure of 2.5 MPa)
Number of gas types 3
Supply pressure Oxygen, air 0.8 MPa
Assist gas Max. 3.0 MPa
Assist gas pressure NC function control Assist gas pressure can be programmed directly Set pressure: Oxygen, air 0.05 to 0.6 MPa Assist gas 0.02 to 3.0 MPa
System Weight Including transformer and chiller unit) 8,800 kg
Machine alone 8,000 kg
Laser Resonator Specifications Laser type CO2 gas laser
Wave length 10.6 μm
Oscillation mode, configuration High-speed axial flow type of DC discharge excitation scheme Integrated oscillator, power unit type
Continuous rated output 2500W
Output range 125 to 2500 W
Pulse mode Normal pulse (NP)
Pulse frequency Pulse duty 1 Hz to less than 1 kHz - 0 to 100% 1 kHz to 2 kHz - 20 to 100%
Beam mode Main component - TEM00
Output stability ±2.0%/8 h
Laser gas Mixed gas of He, N2, and CO2
Mixture rate of laser gases N2 : CO2 : He = 23.4% : 1.7% : 74.9%
Gas consumption amount 10 L/h (during continuous operation)
Beam shutter Built-in mechanical shutter
Chiller System Reservoir 200 liters
Circuit cooled Mirrors, Laser
Material Processing Range Mild Steel 20 mm
Stainless Steel 10 mm
Aluminum 8 mm
Control Specifications Name MAZAK FX
CPU 64 bit
Input method MDI key input or USB
Monitor 15" color LCD
Control method Semi-closed loop
Memory Capacity 2 MB
Program Storage Capacity 1000 programs
Programming method EIA/ISO method and Teaching Playback function
Program numbers 4 digits each
Number of controlled Axes Simultaneous 6 axis control (X-, Y-, Z- A-, B- and C-axes), C- axis OP
Minimum input unit X-, Y- and Z- axes: 0.001 mm A-, B- and C-axes: 0.001 deg
Servo System Digital
Position detector Encoder
Input Interface USB

zoom
4.0 kW Laser Values
Model characteristics Type Flying optics type
Axis drive system AC servomotor Digital servo drives and ball screws
Z axis profiling Non-contact type
Worksheet clamp and locator Two manual Worksheet clamps Locator: 1
Worksheet support method Knife edge; 100-mm pitch
Lighting unit A 68-W beam lamp integrated in the machine lights up the machining position
Oscillation Indicator Yellow signal lamp (laser high voltage ON) Red signal lamp (shutter open)
Assist gas changer Number of gas types: 3 Supply pressure: Oxygen, air 0.8 MPa Assist gas Max. 3.0 MPa
Noise Level Laser Maximum 80 dBA
Safety Interlock System Protects the operator from spatters and reflected laser beams – Class 1
Machine Base Precision machined single cast iron base
Maximum machining size Flat plate 1250 mm x 1250 mm
Plate thickness 22 mm
Solid 900 x 900 x 340 mm
Work table height 900 mm
Maximum loading mass 315 kg
Axis Travel X-axis 1,270 mm
Y-axis 1,270 mm
Z-axis 340 mm
A-axis +/- 99999.999 deg
B-axis +/- 135 deg
C-axis +/- 360 deg
Rapid traverse rate X-, Y- and Z- axis 24 m/min (945 IPM)
A- and B- axis 9,600 °/min
C-axis 12,000 °/min
Maximum machining feedrate X-, Y- and Z- axis 15 m/min (591 IPM)
Positioning accuracy X- and Y- axis +/-0.01/500 mm
Repeatability X-, Y- and Z- axis +/-0.005 mm
A-, B- and C-axis +/-0.01°
Laser machining torch With a lens of focal distance: 7.5‘ (Ф2 in, withstand pressure of 2.5 MPa)
Number of gas types 3
Supply pressure Oxygen, air 0.8 MPa
Assist gas Max. 3.0 MPa
Assist gas pressure NC function control Assist gas pressure can be programmed directly Set pressure: Oxygen, air 0.05 to 0.6 MPa Assist gas 0.02 to 3.0 MPa
System Weight Including transformer and chiller unit) 8,800 kg
Machine alone 8,000 kg
Laser Resonator Specifications Laser type CO2 gas laser
Wave length 10.6 μm
Oscillation mode, configuration High-speed axial flow type of DC discharge excitation scheme Integrated oscillator, power unit type
Continuous rated output 4000 W
Output range 200 to 4000 W
Pulse mode Normal pulse (NP)
Pulse frequency Pulse duty 1 Hz to less than 1 kHz - 0 to 100% 1 kHz to 2 kHz - 20 to 100%
Beam mode Main component - TEM00
Output stability ±2.0%/8 h
Laser gas Mixed gas of He, N2, and CO2
Mixture rate of laser gases N2 : CO2 : He = 23.4% : 1.7% : 74.9%
Gas consumption amount 15 L/h (during continuous operation)
Beam shutter Built-in mechanical shutter
Chiller System Reservoir 270 liters
Circuit cooled Mirrors, Laser
Material Processing Range Mild Steel 25 mm
Stainless Steel 15 mm
Aluminum 12 mm
Control Specifications Name MAZAK FX
CPU 64 bit
Input method MDI key input or USB
Monitor 15" color LCD
Control method Semi-closed loop
Memory Capacity 2 MB
Program Storage Capacity 1000 programs
Programming method EIA/ISO method and Teaching Playback function
Program numbers 4 digits each
Number of controlled Axes Simultaneous 6 axis control (X-, Y-, Z- A-, B- and C-axes), C- axis OP
Minimum input unit X-, Y- and Z- axes: 0.001 mm A-, B- and C-axes: 0.001 deg
Servo System Digital
Position detector Encoder
Input Interface USB